en:soft:qlc:qlc_raspberry

Загрузка не удалась. Возможно, проблемы с правами доступа?

Различия

Показаны различия между двумя версиями страницы.

Ссылка на это сравнение

Предыдущая версия справа и слева Предыдущая версия
Следующая версия		 Предыдущая версия
en:soft:qlc:qlc_raspberry [2017/03/31 07:27] – [What you need] Leoen:soft:qlc:qlc_raspberry [2025/12/25 00:05] (текущий) – внешнее изменение 127.0.0.1
Строка 1: Строка 1:
-====== Managing DMX 512 light on RASPBERRY PI ====== +====== Managing DMX 512 QLC lighting on RASPBERRY PI ====== 
-So when you need to budget and adjust the light, managing remotely from a tablet or laptop. All that I write below is a purely budgetary solution, which will have to be a little tricky <del> brainwashing </ del>. But the end result is worth it.+So when you need to budget and adjust the light, managing remotely from a tablet or laptop. All that I write below is a purely budgetary solution, which will have to be a little tricky <del>brainwashing</del>. But the end result is worth it. 
 +====== Rapberry pi QLC+ deb install ====== 
 + 
 +Thanks to Menshikov Ilya for the finished assembly. You can download the installation DEB file on the page **[[en:soft:qlc:qlc_raspberry_deb_by_menshikov|]]** 
 +**Version: 4.12.7 2023**
 ===== What you need ===== ===== What you need =====
-  - Raspberry PI B ++, RASPBERRY PI 2 or RASPBERRY PI 3 (It is possible to obtain and Orange PI) +  * Raspberry PI B ++, RASPBERRY PI 2 or RASPBERRY PI 3 (It is possible to obtain and Orange PI) 
-  - WI-FI Whistle +  * WI-FI Whistle 
-  - Udmx or ARTnet interface +  * Udmx or ARTnet interface 
-  - Patience +  * Patience 
-  - Flash memory card +  * Flash memory card 
-Flash drive for malinki must be at least 6 class, and its minimum size is not lower than 4 GB of memory. Better Flash 10 class. I tried 6 classes on 8 GB, I did not start, malinka is very capricious to flash drives// +<note warning>Flash drive for RASPBERRY must be at **__least 6 class__**, and its minimum size is not lower than 4 GB of memory. **Better Flash 10 class**.// I tried 6 classes on 8 GB, I did not start, raspberry is very capricious to flash drives//</note> 
-===== Customizing Raspberry =====+===== Customizing Raspberry PI =====
 We will configure and download everything on Windows 7 (// or on any other Windows, I configured it on 64bit //) We will configure and download everything on Windows 7 (// or on any other Windows, I configured it on 64bit //)
 ==== Download ==== ==== Download ====
-  - [[https://cloud.mail.ru/public/4Uae/MGAJMfM2F|OS RASPBIAN JESSIE QLC+]](//Ready image with QLC+ RASPBIAN+  - [[https://cloud.mail.ru/public/4Uae/MGAJMfM2F|OS RASPBIAN JESSIE QLC+]](//Ready my image with QLC+ RASPBIAN + XTE
 //) //)
   - [[https://sourceforge.net/projects/win32diskimager/|Program for writing to RASPBIAN on a USB flash drive   - [[https://sourceforge.net/projects/win32diskimager/|Program for writing to RASPBIAN on a USB flash drive
Строка 19: Строка 23:
 Unzip ** RASPBIAN JESSIE WITH PIXEL ** // (we should get a file with the extension .img) // Unzip ** RASPBIAN JESSIE WITH PIXEL ** // (we should get a file with the extension .img) //
 Install and open the program Win32diskimager, and first we will select a USB flash drive where we will write the system, after we select our unzipped file, and click the Write button (// write //) Install and open the program Win32diskimager, and first we will select a USB flash drive where we will write the system, after we select our unzipped file, and click the Write button (// write //)
-<WRAP center round tip 60%> +<note tip>In order to enable SSH access, we need to create a ssh or ssh.txt file in the root of the flash drive 
-In order to enable SSH access, we need to create a ssh or ssh.txt file in the root of the flash drive +</note>
-</WRAP> +
 {{ https://gladysproject.com/assets/images/pages/installation/win32diskimager.jpg?400 |}} {{ https://gladysproject.com/assets/images/pages/installation/win32diskimager.jpg?400 |}}
 After completing the recording on the flash card, {{ https://habrastorage.org/storage2/fa5/657/bca/fa5657bcae6ce4112c499db4aca4e785.png?200 | }} After completing the recording on the flash card, {{ https://habrastorage.org/storage2/fa5/657/bca/fa5657bcae6ce4112c499db4aca4e785.png?200 | }}
Строка 43: Строка 45:
 '' Pairwise = CCMP '' - for ** WPA2 ** leave '' CCMP '', for ** WPA1 ** change to '' TKIP '' \\ '' Pairwise = CCMP '' - for ** WPA2 ** leave '' CCMP '', for ** WPA1 ** change to '' TKIP '' \\
 '' Auth_alg = OPEN '' - leave it as it is. \\ '' Auth_alg = OPEN '' - leave it as it is. \\
-<WRAP center round tip 60%> +<note tip>After setting up and connecting RASPBERRY PI at boot, the WI-FI whistle should light up. Check the connection of raspberries, you can in the settings of the router. 
-After setting up and connecting RASPBERRY PI at boot, the WI-FI whistle should light up. Check the connection of raspberries, you can in the settings of the router. +</note>
-</WRAP>+
 === Connect with SSH === === Connect with SSH ===
-When we learned the IP address of our malinka, run PUTTY and connect to SSH+When we learned the IP address of our raspberry, run PUTTY and connect to SSH
 {{ https://657cea1304d5d92ee105-33ee89321dddef28209b83f19f06774f.ssl.cf1.rackcdn.com/Windows9-9e1984b61ecb09882708fb11f29652fd5f950c09babd9ee4cef0b824c158623a.png?600 |}} {{ https://657cea1304d5d92ee105-33ee89321dddef28209b83f19f06774f.ssl.cf1.rackcdn.com/Windows9-9e1984b61ecb09882708fb11f29652fd5f950c09babd9ee4cef0b824c158623a.png?600 |}}
-And after a successful connection, the malink will ask for the login and password+And after a successful connection, the raspberry will ask for the login and password
 {{ https://cdn.instructables.com/FBU/2BDU/H7NLY7OG/FBU2BDUH7NLY7OG.MEDIUM.jpg?400 |}} {{ https://cdn.instructables.com/FBU/2BDU/H7NLY7OG/FBU2BDUH7NLY7OG.MEDIUM.jpg?400 |}}
 __Default__:\\ __Default__:\\
  • en/soft/qlc/qlc_raspberry.1490945223.txt.gz
  • Последнее изменение: 2017/06/09 20:05
  • (внешнее изменение)