Различия

Показаны различия между двумя версиями страницы.

--- en:soft:qlc:qlc_raspberry [2017/03/31 20:25] – Leo
+++ en:soft:qlc:qlc_raspberry [2025/12/25 00:05] (текущий) – внешнее изменение 127.0.0.1
@@ Строка 1: / Строка 1: @@
-====== Managing DMX 512 light on RASPBERRY PI ======
+====== Managing DMX 512 QLC lighting on RASPBERRY PI ======
 So when you need to budget and adjust the light, managing remotely from a tablet or laptop. All that I write below is a purely budgetary solution, which will have to be a little tricky <del>brainwashing</del>. But the end result is worth it.
+====== Rapberry pi QLC+ deb install ======
+Thanks to Menshikov Ilya for the finished assembly. You can download the installation DEB file on the page **[[en:soft:qlc:qlc_raspberry_deb_by_menshikov|]]**
+**Version: 4.12.7 2023**
 ===== What you need =====
   * Raspberry PI B ++, RASPBERRY PI 2 or RASPBERRY PI 3 (It is possible to obtain and Orange PI)
@@ Строка 8: / Строка 12: @@
   * Flash memory card
 <note warning>Flash drive for RASPBERRY must be at **__least 6 class__**, and its minimum size is not lower than 4 GB of memory. **Better Flash 10 class**.// I tried 6 classes on 8 GB, I did not start, raspberry is very capricious to flash drives//</note>
-===== Customizing Raspberry =====
+===== Customizing Raspberry PI =====
 We will configure and download everything on Windows 7 (// or on any other Windows, I configured it on 64bit //)
 ==== Download ====
-  - [[https://cloud.mail.ru/public/4Uae/MGAJMfM2F|OS RASPBIAN JESSIE QLC+]](//Ready image with QLC+ RASPBIAN
+  - [[https://cloud.mail.ru/public/4Uae/MGAJMfM2F|OS RASPBIAN JESSIE QLC+]](//Ready my image with QLC+ RASPBIAN + XTE
 //)
   - [[https://sourceforge.net/projects/win32diskimager/|Program for writing to RASPBIAN on a USB flash drive
@@ Строка 19: / Строка 23: @@
 Unzip ** RASPBIAN JESSIE WITH PIXEL ** // (we should get a file with the extension .img) //
 Install and open the program Win32diskimager, and first we will select a USB flash drive where we will write the system, after we select our unzipped file, and click the Write button (// write //)
-<WRAP center round tip 60%>
+<note tip>In order to enable SSH access, we need to create a ssh or ssh.txt file in the root of the flash drive
-In order to enable SSH access, we need to create a ssh or ssh.txt file in the root of the flash drive
+</note>
-</WRAP>
 {{ https://gladysproject.com/assets/images/pages/installation/win32diskimager.jpg?400 |}}
 After completing the recording on the flash card, {{ https://habrastorage.org/storage2/fa5/657/bca/fa5657bcae6ce4112c499db4aca4e785.png?200 | }}
@@ Строка 43: / Строка 45: @@
 '' Pairwise = CCMP '' - for ** WPA2 ** leave '' CCMP '', for ** WPA1 ** change to '' TKIP '' \\
 '' Auth_alg = OPEN '' - leave it as it is. \\
-<WRAP center round tip 60%>
+<note tip>After setting up and connecting RASPBERRY PI at boot, the WI-FI whistle should light up. Check the connection of raspberries, you can in the settings of the router.
-After setting up and connecting RASPBERRY PI at boot, the WI-FI whistle should light up. Check the connection of raspberries, you can in the settings of the router.
+</note>
-</WRAP>
 === Connect with SSH ===
 When we learned the IP address of our raspberry, run PUTTY and connect to SSH