Различия
Показаны различия между двумя версиями страницы.
| Следующая версия | Предыдущая версия | ||
| de:soft:qlc:qlc_raspberry [2017/03/31 07:23] – angelegt Leo | de:soft:qlc:qlc_raspberry [2025/12/21 23:35] (текущий) – удалено 216.73.216.10 | ||
|---|---|---|---|
| Строка 1: | Строка 1: | ||
| - | FIXME **Diese Seite wurde noch nicht vollständig übersetzt. Bitte helfen Sie bei der Übersetzung.**\\ //(diesen Absatz entfernen, wenn die Übersetzung abgeschlossen wurde)// | ||
| - | ====== Managing DMX 512 light on RASPBERRY PI ====== | ||
| - | So when you need to budget and adjust the light, managing remotely from a tablet or laptop. All that I write below is a purely budgetary solution, which will have to be a little tricky <del> brainwashing </ del>. But the end result is worth it. | ||
| - | ===== What you need ===== | ||
| - | - Raspberry PI B ++, RASPBERRY PI 2 or RASPBERRY PI 3 (It is possible to obtain and Orange PI <del> orange </ del>) | ||
| - | - WI-FI Whistle | ||
| - | - Udmx or ARTnet interface | ||
| - | - Patience | ||
| - | - Flash memory card | ||
| - | Flash drive for malinki must be at least 6 class, and its minimum size is not lower than 4 GB of memory. Better Flash 10 class. / I tried 6 classes on 8 GB, I did not start, malinka is very capricious to flash drives / / | ||
| - | ===== Customizing Raspberry ===== | ||
| - | We will configure and download everything on Windows 7 (// or on any other Windows, I configured it on 64bit //) | ||
| - | ==== Download ==== | ||
| - | - [[https:// | ||
| - | //) | ||
| - | - [[https:// | ||
| - | | ||
| - | - [[http:// | ||
| - | ==== Установка RASPBIAN ==== | ||
| - | Unzip ** RASPBIAN JESSIE WITH PIXEL ** // (we should get a file with the extension .img) // | ||
| - | Install and open the program Win32diskimager, | ||
| - | <WRAP center round tip 60%> | ||
| - | In order to enable SSH access, we need to create a ssh or ssh.txt file in the root of the flash drive | ||
| - | </ | ||
| - | |||
| - | {{ https:// | ||
| - | After completing the recording on the flash card, {{ https:// | ||
| - | Go to it and create a file ** wpa_supplicant.conf ** (// This file is responsible for configuring the network //) | ||
| - | In it we will see the following: | ||
| - | < | ||
| - | network={ | ||
| - | ssid=" | ||
| - | psk=" | ||
| - | proto=RSN | ||
| - | key_mgmt=WPA-PSK | ||
| - | pairwise=CCMP | ||
| - | auth_alg=OPEN | ||
| - | } | ||
| - | </ | ||
| - | '' | ||
| - | '' | ||
| - | '' | ||
| - | '' | ||
| - | '' | ||
| - | '' | ||
| - | <WRAP center round tip 60%> | ||
| - | After setting up and connecting RASPBERRY PI at boot, the WI-FI whistle should light up. Check the connection of raspberries, | ||
| - | </ | ||
| - | === Connect with SSH === | ||
| - | When we learned the IP address of our malinka, run PUTTY and connect to SSH | ||
| - | {{ https:// | ||
| - | And after a successful connection, the malink will ask for the login and password | ||
| - | {{ https:// | ||
| - | __Default__: | ||
| - | Login: | ||
| - | Password: | ||
| - | === RDP Connection === | ||
| - | To run the RDP client under Windows, run on your computer: | ||
| - | 1. Press the menu "** Start **" ("** Start **") -> select the item "** Run ** ..." | ||
| - | {{ https:// | ||
| - | 2. In the window that appears, type ** mstsc.exe ** and click "** OK **": | ||
| - | {{ https:// | ||
| - | 3. Enter __IP address RASPBERRY__ in the field "** Computer **" and press the button "** Connect **": | ||
| - | {{ https:// | ||
| - | 4. If the "** can not be authenticated **" window appears, check the box "** __ no longer display the query __ **" and press the "** Yes **" button: | ||
| - | {{ https:// | ||
| - | {{ https:// | ||