This is an old revision of the document!


DMX RGB Decoder 3 channel control DC12V/24V 3A/CH

The 3-channel DMX controller controls 3 DMX channels. It is actually a real dimmer block for rgb tapes. It is one of the cheapest decoders on the market. Production China.

DMX 512 Decoder

The DMX24506 uses a modern microcomputer Control technology and converts the widely used Digital signal DMX24506 in the analog. As options, you can But use from 1 to 3 channels with 256 shades of gray. Also The device can be used as a PC connector Controlled digital lighting controller and analog Modulator of illumination. As a rule, the decoder is used for LED building lighting control.

  • Compliance with DMX512.
  • 256 levels of brightness, full color control.
  • 3 channels with a current load of up to 3A on each channel.
  • Excellent effects thanks to the control system.
  • Thanks to the mechanism for selecting colors, you can control from 1 to 3 colors.
  • Independent DMX address setting.
  • Ability to specify the requirements of the customer.

DMX RGB DECODER FRONT

Specifications
Control Channels 3 channels 1)
Values ​​ 256 channel values ​​
Output power 3 Amperes per channel 2)
Effects Inclusion, intensity, mixing
DMX Set the address of the DIP switches.
Working voltage 12-24V
Operating temperature range: 0 ~ 50 ° C.
Overall dimensions: 86 (mm) * 51 (mm) * 17.8 (mm).
Power consumption in standby mode: <1W.
Weight: 110g.
Optional Power can be increased by amplifiers
1)
Each channel is controlled separately
2)
Each channel gives out 3 amps
Enter your comment. Wiki syntax is allowed: